Fast-Set. Easy Clean.

Ready When You Are.

What are precast adhesives?

Casttec glue and the tec range of heavy-duty industrial glue applicators from Power Adhesives are the fastest, more cost-effective way for the concrete industry to securely position both structural and architectural elements to precast concrete forms.

This one-step process does not require primer, and once the parts are brought together the adhesive sets instantly to provide a bond that is strong enough to withstand the pouring and vibration of pouring the concrete. Once the concrete has set, the section can be easily removed and any adhesive residue on the mold base can simply be scraped off for a fast and easy clean up. Which means that the forms can be quickly reset for the next work day.

Put Our Kettle To The Mettle.

casttec®

Safety Kettle

The casttec® Safety Kettle from Power Adhesives is a safe, portable applicator for the delivery of high output hot melt adhesive used in the forming stage of the pre-cast concrete industry.

The casttec® safety kettle is designed to assist the precast manufacturer with the safe application of hot melt adhesive for larger forming elements such as:

Bulk heads
Side rails
Large diameter foam hole formers

Insulated Shell

Plastic Insulation allows the inside vessel to reach maximum temperatures of 380°F/195°C but at the same time provide cooler outside surface temperatures to prevent accidental burns.

Long & Stable Handle

Handle is position directly across from the pour spout to give the operator control of the kettle without unintended tipping or movement that can cause spills and burns.

Total Control

The variable temperature thermostat allows the system to operate from 320°F/160°C and 380°F/195°C depending on the operator setting.

Safety Shut Down

The over temperature system is designed to shut down all power to the heaters if temperature surpasses the maximum temperature rating.

Self-Contained Heating

Built in electric heating system allows the casttec® safety kettle to quickly and efficiently melt the hot melt adhesive without the need for external hot plates or burners.

Easy Loading

Easily load the safety kettle by dropping casttec® glue slugs into the 1 3⁄4” diameter loading tube on the top of the casttec® Safety Kettle, so no need to open a lid.

1. Power on

Turn the casttec® safety kettle on. Allow 30-45 minutes for the adhesive to completely melt

2. Load up

Insert casttec® hot melt adhesive slugs (43mm or pillows) to fill the kettle to capacity

3. Work hands free

Disconnect from the power source to allow cordless use. Pour casttec® glue from port spout (15-20 minute operation time without power)

4. Easy clean

Easily cleans from forms without damage or residue

Which casttec® adhesive?

Casttec® adhesives comes in four different formulations to maximize performance depending on applications and work environment.

Casttec 42-43

Open time : Up to 3 mins

The best seller and most general purpose adhesive. Bonds a wide range of materials and recrystallises for easy clean

From $50

Casttec Cool 45-43

Open time : Up to 3 mins

Designed to use in colder environments by offering a longer recrystallisation period. When the forms are cold in winter, Casttec Cool offers stronger bonds at lower temperatures

From $50

Casttec Lite 40-43

Open time : Up to 3 mins

If your forms are fiber glass, Urethane or Epoxy coated this is the product for you. Cleans without surface damage on forms not made of steel.

From $50

Casttec Max 43-43

Open time : Up to 6 mins

Precast adhesive for use when repeated pours are required without resetting the form. Is harder to clean up, but will reduce the amount of work resetting forms that repeat in design daily

From $50

The casttec range

These advanced industrial glue guns can dispense casttec®
hot melt glue at high output rates.

Safety Kettle

The casttec® Safety Kettle is safe, portable and designed for high output application of hot melt adhesive. Built-in safety features, easy to use and takes 43mm (1¾”) slugs or bulk pillows.

$399.99

tec 3400

High output, electronically controlled 43mm (1¾”) glue gun made to withstand industrial environments. A powerful tool featuring patented ECOTEC® technology for exceptional temperature precision and eco-friendly standby operation.

$319.99

tec 6100

High output pneumatically assisted extrusion glue gun for industrial use. Air assisted output reduces operator fatigue. Power- on indicator light, requires air and electric supply. Maximum 7 bar (100psi), for best results set to 4-6 bar (60-90psi) dependent on output requirements.

$489.99

tec 7100

Very high output pneumatically assisted extrusion glue gun for industrial use. Air assisted output reduces operator fatigue. Power on indicator and speed load design helps save time reloading. Requires air and electric supply. Maximum 7 bar (100psi), for best results set to 4-6 bar (60-90psi) dependent on output requirements.

$539.99

tec 6300

High output pneumatically assisted spray glue gun for industrial use. Gun dispenses hot melt when held at any angle, with adjustable pattern. A nontoxic adhesive spray system, it covers large area and applies hot melt to heat sensitive substrates without damage. Requires air and electric supply. Maximum 7 bar (100psi), for best results 4-6 bar (60-90psi) dependent on output requirements.

$549.99

tec 7300

Very high output pneumatically assisted spray glue gun for industrial use. Gun dispenses hot melt when held at any angle, with adjustable pattern. A nontoxic adhesive spray system, it covers large area and applies hot melt to heat sensitive substrates without damage. Speed loader design helps save time reloading. Requires air and electric supply. Maximum 7 bar (100psi), for best results 4-6 bar (60-90psi) dependent on output requirements.

$619.99

GLS Products | Adhesive Solutions Supplier of industry leading hot melt adhesive applicators and accessories.

Power Adhesives Ltd | Europe’s leading shaped hot melt adhesive specialist, producing high quality, competitively priced hot melt glue sticks and glue guns in the world.